Saturday, 2 December 2017

TB's stripped

Stripped the GSXR Throttle bodies and the inlets fit the original carb rubbers.


think I'll take off the secondary butterflies as 1 is not there anyway.

Its something the suzuki boys do anyway.

I can then hopefully tap the holes and fit air flow sensors for the Microsquirt input.
TPS is separate from this and is needed.

I also need to setup a crank sensor with 2 TDC's as its a 180 crank. MS will sense the VR through the gaps in the tooted crank wheel. I may locate this on the righe pinion which connects to the clutch basket

Posted by at

3 comments:

  1. Aluminium Die Casting3 November 2019 at 22:26

    Information is very informative also you can click Aluminum Die Casting Supplier ,and get such type of info, this is the great resource to get such type of information.

    ReplyDelete
  2. Molds China7 November 2019 at 02:31

    first off, a hearty thanks to you. Your blog is awesome and completely knowledgeable and I completely satisfied with the reading. Keep your work spread till long after. For more Injection molding China related information visit Molds China.Certainly, you are Right!!

    ReplyDelete
  3. Plastic Mould Manufacturers20 November 2019 at 04:21

    Thanks for sharing the best information and suggestions, If you are looking for the best Injection Mold Company, then visit GC PRECISION MOLD. Highly energetic blog, I’d love to find out some additional information.

    ReplyDelete

Subscribe to: Post Comments (Atom)