Saturday 8 January 2011

brakes

I got looking around the net and felt that the brakes i have on the front won't do any justice. So I got a TZR125 disk from ebay and fitted that!

looks good

now I've looked at this site http://srx6blk.web.infoseek.co.jp/SR/SR-DiskBrake.htm


and seen the blue spot calipers on there that fit the SR (same braking system but on the other side) and seen that the XJR 1300 has these so I've just gone and bought one off ebay.


so we'll see when it comes if I can get it to fit.
The disk will need spacing and a bracket made to fit the caliper, other than that I don't envisage any probs!!
Posted by at

4 comments:

  1. Unknown27 January 2011 at 02:45

    Hello there, ive just purchased a 1980 xs250 that requires a front caliper to finish. i have been dirverted to your blog via the yamaha owners club, and was wondering if you could help?? Regards Andy.

    ReplyDelete
  2. Drew30 January 2011 at 11:31

    It just happens i have a refurbed front caliper with stainless piston. I just needs to repaint the caliper as I spilt brake fluid on it when I fitted a faulty brake line.

    PM me through the YOC

    drewps

    ReplyDelete
  3. Jono Ray16 March 2011 at 03:55

    hey Drew, love the XS DT. Im working on an XS project and have picked up a blue spot caliper and looking into getting a bracket made. How did you go with the SR bracket? Furthermore can you offer any advise as to a disc that will fot this caliper, with or without spacers? cheers, jono

    ReplyDelete
  4. Drew21 May 2011 at 03:21

    @ jono have a look at the link I posted for compatible disks.A fellow xs owner got ducati disk and says its dished so he doesn't need a spacer.
    I only just got the spacer delivered 20/5/11, just got to remember which spec I sent him!

    ReplyDelete

Subscribe to: Post Comments (Atom)